02-2225-1234
심미보철, 총의치, 국소의치, 임플란트보철
| 구분 | 월 | 화 | 수 | 목 | 금 | 토 |
|---|---|---|---|---|---|---|
| 오전 | 진료가능 | 진료가능 | ||||
| 오후 | 진료가능 |

- 최근 5년간의 자료
| 2026/01 | 공동저자 | 대한치과보철학회지 | Implant-assisted removable partial denture restoration in a patient with mandibular single tooth: a case report |
|---|---|---|---|
| 2025/07 | 공동저자 | 대한치과보철학회 | 하악 소수치 잔존환자에서 임플란트 크라운(Implant-supported crown)을 이용한 임플란트 보조 국소의치(IARPD) 수복증례 |
| 2025/04 | 공동저자 | The Journal of Korean Academy of Prosthodontics | Prosthodontic treatment with implant-assisted partial denture for limited abutment teeth and bone loss : case report |
| 2025/04 | 공동저자 | 대한치과보철학회 | 상악 완전 무치악 환자에서 치과용 CAD/ CAM을 활용한 완전 고정성 임플란트 수복 증례 |
| 2025/04 | 공동저자 | 대한치과보철학회 | 하악 단일 잔존치를 가진 부분 무치악 환자의 임플란트 보조 가철성 국소의치 수복 증례 |
| 2024/09 | 공동저자 | Applied sciences | Four Different Build Angles in 3D-Printed Complete Denture Bases: A Comparative In Vitro Study |
| 2024/04 | 공동저자 | 대한치과보철학회지 | CAD-CAM을 이용한 RPD 지대치의 retrofit crown 제작 증례 |
| 2024/04 | 공동저자 | 대한치과보철학회지 | 과도한 치아 마모와 교합평면 붕괴를 보이는 환자에서 상악 고정성 보철 및 하악 임플란트 보조 국소의치를 통한 구강회복 증례 |
| 2024/04 | 공동저자 | 대한치과보철학회지 | 만성 치주염 환자에서 다수치 발거 후 디지털 임시 즉시 의치 제작 및 임플란트 지지 가철성 국소의치 수복 증례 |
| 2024/04 | 공동저자 | 대한치과보철학회지 | 비기능 하악 운동으로 과도하게 마모된 치아를 가진 환자에서 수직 고경 증가를 동반한 전악 수복 증례보고 |
| 2023/07 | 공동저자 | Journal of the mechanical behavior of biomedical materials | Effects of washing solution temperature on the biocompatibility and mechanical properties of 3D-Printed dental resin material |
| 2023/04 | 공동저자 | 대한치과보철학회지 | Rehabilitation with minimal increase in occlusal vertical dimension in a patient with excessive tooth wear and edge-to-edge bite |
| 2023/04 | 공동저자 | 대한치과보철학회지 | 상악전치부 단일 상실환자에서 지르코니아 레진접착성 고정성 국소의치를 이용한 수복증례 |
| 2023/01 | 공동저자 | 대한치과보철학회지 | Computer-guided implant surgery를 활용한 상악 무치악 환자의 전악 임플란트고정성 보철물 수복 증례 |
| 2022/11 | 공동저자 | Dental materials | Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials |
| 2022/10 | 공동저자 | Journal of dentistry | Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study |
| 2022/04 | 공동저자 | J Adv Prosthodont | Impact of scanning strategy on the accuracy of complete-arch intraoral scans: a preliminary study on segmental scans and merge methods |
| 2022/04 | 공동저자 | J Mech Behav Biomed Mater | Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations |
| 2022/01 | 공동저자 | 대한치과보철학회지 | 편측 구치 및 전치 상실로 인한 교합 붕괴 환자에서 치료 의치와 임플란트 보조 국소의치를 이용한 수복 증례 |
| 2021/11 | 공동저자 | Journal of the Korean Academy of Esthetic Dentistry | Maxillary tuberosity connective tissue graft for restoration of gingival depression in the anterior implant region |
| 2021/02 | 교신저자 | International Journal of Oral & Maxillofacial Implants | Reliability verification of damping capacity assessment through in vitro analysis of implant micromotion in peri-implant bone loss model |
- 최근 3년간의 자료
| [MBC] 신축 치과병원 시설 및 장비 등 홍보 | 2024/03/18 |
이 페이지에서 제공하는 정보에 대하여 어느 정도 만족하셨습니까?